1,1, furnace to check before good electrical equipment, water cooling system,
such as sensors copper pipe is in good condition, otherwise prohibited
furnace.
2,Melting furnace more than regulations should be repaired in time. It is
strictly prohibited to melting in too deep within the crucible melting.
3,Electric transmission and furnace should have the specialist is
responsible, after contact with sensors and transfer it is strictly prohibited
to cable. The shift away from post without permission, attention should be paid
to the sensor and the external conditions.
4,Pack material, should check in inflammable and explosive, without charging
mixing hazardous materials, such as should be removed in time, it is strictly
prohibited to cold and wet material directly add to material in liquid steel,
melting liquid filled with first department of materials is strictly prohibited
after to join, in case "cover
5,Fill furnace and pickled system when it is strictly prohibited to scrap
iron crucible, ferric oxide hybrid, broke the crucible must be
close-grained.
6,Casting the venue and the dancers pit furnace should be no obstacle, no
water, in case the molten steel be born explosion.
7,The molten steel does not allow costumes too full, hand carry bag pouring,
two people should cooperate with consistent, walk should be stable, no hurry go
urgent stop, after pouring YuGang pour into the designated place, forbidden
disorderly fall.
8,Intermediate frequency generator room should be kept clean, forbidden
flammable and explosive substances and other sundry brought into indoor, indoor
banned smoking.
Strict quality system is our usual practice, We only treat each customer, to
win the support of the customers. "Customers’ satisfaction is our eternal
pursue, no best, only better" is hengyang furnace company service.
Hengyang Furnace Manufacturing Co.,Ltd, as well as spare parts and complete.
induction melting furnace.metal melting furnace.copper melting furnace.iron
melting furnace.steel melting furnace.aluminum melting furnace.gold melting
furnace etc.May be available from stock. Products are widely used in metal
melting, and casting pressure, sintering, heat treatment before the bend
forming. As well as the mechanical components of the quenching and tempering and
other areas ofinduction heating. Is mainly used in foundry smelting industry.
products are: Fast melting, efficient energy saving, small footprint,
temperature easy to control, little pollution, meet the requirements of
environmental protection advantages.